How to fix a zipper on a jacket yourself, repair methods

The failure of the fastener on various products is a common problem faced by both children and adults. To understand how to fix a zipper on a jacket, you should first find the cause of the breakdown. Often, the accessory fails in the places that are most often used due to simple wear and tear. You can do the repair yourself or take the item to a studio, where the zipper will be replaced quickly and inexpensively.

Common causes of breakdowns

There are many reasons why a zipper on a jacket does not close. Such damage occurs due to a poor-quality product, long-term wearing and use of the fastener. Other reasons that can lead to the zipper coming apart on a jacket include:

1. Improper storage of products with zippers - under the influence of high temperatures or pressure, the fastener may become deformed, as a result of which it ceases to fulfill its intended purpose.
2. Adverse weather conditions (rain or snow), which further wear out the zipper, especially if it is used during precipitation.
3. Careless use of the zipper. This causes the problem of loosening of the runner, which subsequently does not hold the teeth of the tape, does not fix them. Such cases occur during haste and strong jerks of the zipper.
4. Active use of the lock, which leads to rapid wear.
5. Poor quality of the product. Often the breakage occurs due to fraying of one of the parts of the double tape, which results in difficulties in joining the two components of the zipper, and the zipper comes apart after fastening.

To understand how to repair a zipper on a jacket that is coming apart, you need to accurately determine the location of the damage. Many items with zippers are purchased for several seasons. The fastener lasts on average 1-1.5 years. When purchasing an item, it should be carefully inspected. It is better to take clothes with glued tape, in this case the fabric will not come apart.

Repair methods

There are not many ways to repair a zipper. Often, when a zipper breaks, they simply go to clothing repair shops and replace the old lock or tape with new ones for a small fee. However, if necessary, if the top or bottom of the zipper does not unfasten, you can replace it yourself. Also, the possibility of restoration depends on the material from which the zipper is made, the complexity of the repair. If the zipper on the jacket breaks, what to do can be understood based on the cause of the malfunction.

When jammed

The zipper often gets stuck even on high-quality products. You can solve this problem yourself using a simple pencil. You should prepare the lead. It is necessary to use only a soft type, since a hard one will not lubricate the mechanism to the required degree. After that, you need to run it 4-5 times along the inside of the lock. After using this method, the zipper will fasten without jamming. You can also use soap, candles and various lubricants instead of a pencil lead. However, before fixing the zipper on a jacket, it is important to pay attention to the material from which the item is made, think about the possibility of cleaning the stain if the product gets on the surface of the product.

If the base or tongue breaks

In most cases, it is impossible to repair the base of the lock, since during damage the fastening suffers, which is impossible to restore at home. In such a situation, the only option is to completely replace this part. On the back of the tape, there is usually a code with sizes, by which you can find a suitable dog (zipper base) in any hardware department. After purchasing, the runner should be attached to the desired place, having previously removed the metal stoppers from the zipper using a needle or an equally thin and durable device.

The runner, unlike the base, is subject to repair and can be replaced with improvised means. To do this, you will need:

• a simple stationery pin;
• a metal ring for a keychain or keys.

Such devices are easy to place in the retainer and use as a classic slider. If the hole where the tongue should be inserted is damaged, it is necessary to completely replace the base of the fastener.

Trying to zip the zipper manually can only cause harm, as this method wears out the teeth on the tape due to friction. This is the reason why it breaks.

In case of discrepancy

Internal damage is the most common reason why a metal zipper comes apart. There are several methods to fix this problem. If the zipper comes apart in the middle, then the teeth on the tape are damaged. This happens due to strong tension of the jacket due to a size mismatch or improper care. Several teeth of the tape go out of order, which in turn prevents the zipper from working properly. To restore the tape, lay the product on a flat surface and tap lightly on both sides of the teeth. After this, the zipper will close tighter, but the divergence will disappear.

If the zipper comes apart at the bottom, this indicates wear of the runner, whose side elements become too wide and do not fix the second part of the fastener. In this case, simple pliers will help, with which you should clamp both sides of the base. You must be careful and not apply too much force, since the lock can burst or crumble under pressure. Immediately after using this method, the zipper will be noticeably tighter, but over time it will work out and return to its original state.

Replacing the runner at home

To properly replace the old runner with a new one if the zipper has come apart, you must follow this procedure:

1. Remove the broken runner. To do this, use a needle or an awl to detach the metal retainer.
2. On the new dog, spread the edges a little. It is important not to apply too much force so as not to break the clasp.
3. Install the new zipper puller. Then lightly clamp the attached edge with pliers.

The best materials for zippers are stainless steel and hard plastic, they can withstand various weather and temperature conditions and are also resistant to medium loads.

Damage prevention

To prevent lightning damage, follow a few simple tips:

1. When washing the jacket, you should zip up all zippers and turn the garment inside out.
2. When ironing clothes with fasteners made of non-heat-resistant materials, avoid placing the iron in the zipper area.
3. To extend the life of the lock, it should be periodically treated with special care products, such as hydrophobic grease. This substance provides the clasp with water-repellent and windproof protection.
4. Before pulling the runner from below, you need to insert both parts into the lock as far as they will go.
5. It is necessary to occasionally treat the teeth and the lock with a soft pencil lead or other substance to lubricate the surface.
6. You need to zip up the zipper without haste or force, at this moment the tape should be in a taut position.

To prevent wear, periodically clean all zipper components with a small brush. It is recommended to use toothbrush, as its bristles are quite soft and small. With careful and gentle handling, any item can serve for many years without a single repair.

Video