How to roll up the sleeves of a shirt in different ways, advice from stylists

You can diversify your look not only by completely changing your clothes or individual elements of them. A loose shirt, buttoning up with one button, a dropped strap of a sundress, fake suspenders - the list of little tricks is long. A similar effect can be achieved by knowing how to roll up the sleeves of a shirt to look stylish. This technique will add zest to the image or completely ruin the whole look if used incorrectly.

In what images is a turn-up appropriate?

No one will argue about the convenience of rolled-up shirt sleeves. Almost everyone has used this technique at some point. There are various reasons for this:

1. It's too hot and you need to free your hands as much as possible.
2. You don't want to get the edge of your sleeve dirty when doing any dirty work.
3. The sleeves are too long and prevent a woman or a man from looking at the watch.
4. It is necessary to make the image less formal.
5. I became interested in something and wanted to start working immediately.
6. Creating a certain style in clothing.

In all of the above situations, different methods are used, so it will be useful for both men and women to learn how to roll up their sleeves. For physical work, for example, it is reasonable to raise the cuffs to the desired height in a simple, classic way. It is easy to use this technique to complete a fashionable look if you understand how to roll up the sleeves on shirts correctly. Such a detail will be an appropriate addition to street style, casual, sports, safari, military, disco, folk, multi-colored, oversized. You do not need to experiment with it in business, office, romantic looks, as the clothes can become shocking.

Checkered shirts with rolled-up sleeves are worn with jeans and a T-shirt, trousers without creases will also suit them. Moreover, the former can also be rolled up, complementing the look with sneakers, moccasins. This technique is not acceptable with shorts. You can wear a shirt with cuffs on the sleeves with a vest, this option will be appropriate at an official reception. In this case, an expensive watch will help emphasize the status of a man.

Simple ways

Schematically, a simple roll-up of shirt sleeves is performed as follows:

• the sleeves are straightened out to their full length;
• the buttons are unbuttoned and the cuffs are also straightened;
• the cuff is carefully folded upwards, the created fold is straightened;
• the action is repeated several times until the desired length is achieved;
• each time the folds are straightened out, including at the end.

Before rolling up the sleeves of a shirt, you need to decide what part of the arm will be exposed: the hand, the forearm, the elbow, half of the humerus. Any of these options is possible.

It is necessary to adhere to the rule: if the bottom line is raised up less than 10-15 cm, the men's shirt will look like "from a younger brother".

The technique described above can be used on a shirt with long or short sleeves. Before you start rolling it up, you need to think about how suitable the style of the garment and the material are for this. From a practical point of view, the following restrictions apply:

1. Sleeves of items made from silk, synthetic, acetate, or very thin fabrics do not stay rolled up well. In this case, the width of the lapel involuntarily decreases, to the point of completely folding into a "pipe" or gradually lowering.
2. The men's version with cufflinks is not suitable for turning away.
3. It is not possible to make a neat lapel on modern shirt models without a cuff, as well as those with a sleeve style that widens towards the armpit area.

Shirt styles that look good with a turn-up:

• double-sided;
• with a button located on a special element for securing the lapel (when straightened, such a detail is hidden inside);
• equipped with a double cuff fastening.

Classical

To roll up a shirt in a classic way means to roll up its sleeve by 3 or 4 folded cuffs. In this case, the length is up to the elbow or just above it. This method of giving the appearance a certain swagger and a touch of sexuality is often used by office workers at the end of the working day. This demonstrates that the severity of the suit has been reduced, the person has relaxed. Despite the fact that the difference in the size of the lapel is not so significant, such things look different. The disadvantage of this method is that it is not recommended for shirts made of silk and some other materials.

Three quarters

You can raise the sleeve by three-quarters of the arm length by carefully folding the cuff, folding it like an accordion or rolling it up. In this case, the item of clothing will be completely wrinkled. In addition, such a lapel does not hold well and will tend to straighten back whenever the arm is straightened. Such methods are often used when creating the image of a macho who does not accept neatness.

Those with thin arms should be careful with such cuff options. A three-quarter sleeve emphasizes thinness even more. For such guys, designers offer a complex cuff option: first, turn the cuff twice (or once), and then pull it up to the desired height.

There is an opinion that sleeves turned up to half the elbow give width to the shoulders, which is beneficial for any male figure.

Elegant

For those who are required to wear office style, it is important to know how to roll up the sleeves of a shirt so as not to fall out of the image of a business person. For such a status, in principle, turning down this element of clothing during working hours is unacceptable. If this must be done, then an elegant turn-up consists of the following:

1. Determine whether the entire width of the cuff or half of it will be used as the basis for the lapel.
2. Straighten the unbuttoned cuff.
3. Carefully fold the first flap upward and carefully smooth the fabric at the fold.
4. Make several similar folds up to half of the radial part of the arm.

The fabric should not look pulled over. Each fold is accompanied by smoothing out creases and manually "ironing" the folds.

Italian

Shirts with long sleeves turned up in the Italian style look stylish. Despite the fact that the method is simple, it looks elegant if the quality of the fabric allows it. The step-by-step execution is as follows:

1. Straighten the sleeve down, unbutton the button.
2. Taking the bottom edge of the cuff, pull it up, just above the elbow.
3. Fold the bottom fabric, folded in half, in half again.
4. Partially place the newly obtained fold on the cuff, covering it by three quarters.

The turn-up is especially beautiful when the inner part of the cuff is made of another fabric (for example, checkered or printed). Another condition is sufficient density of the material. For shirts made of light fabrics, this method is not recommended.

For button down shirts

Manufacturers produce shirts in large quantities equipped with special buttons for turning up the sleeves. The fittings are usually located on the outside of the garment, at a height of one third from the elbow. A special strap is attached to it, which is sewn inside and holds the sleeve, turning it 360 degrees. Such models are suitable for men, women, teenagers, children. They are practical and functional: the sleeve can be unfastened and straightened at any time. Such options are often used on workwear, as well as in sports and youth styles.

Nuances depending on the type of fabric

The cuff looks good on cotton, denim, synthetic fabrics with the addition of lycra, twill. Products made of such materials should be rolled up with careful straightening of each layer of the hem. Slightly softer varieties are: corduroy, oxford, poplin, jacquard. Fabrics of this texture do not hold the shape of rolled-up sleeves well, for them, twisting options are acceptable. Silk, polyester, flannel, knitted, nylon materials should not be rolled up at all. They will not hold in this position unless they are first secured with threads.

There are recommendations regarding designs on sleeves that are planned to be rolled up. It is ideal when men's shirts are made in a single color scheme or decorated with a small, frequent print. For shirts with a large pattern, the solution is double-sided fabric.

How to Avoid Common Mistakes

Today's fashion is not so strict about rolled-up sleeves. However, to look fashionable and beautiful, it is worth remembering the rules:

1. The size of the lapel should not be less than 10–15 cm.
2. A white shirt with rolled-up sleeves loses its perfection.
3. Avoid lifting your sleeves up to your armpits.
4. Models made from materials with large, bright patterns can only be folded using the accordion method.
5. Silk, flannel and jersey fabrics are not suitable for rolling.
6. In a strict style of clothing, as well as in a soft romantic style, turned-down sleeves are an unnecessary detail.
7. For women, an elegant roll-up option is suitable, but you should not roll up the light, airy fabric of the blouse.
8. The Italian lapel looks stylish on men's shirts with a cuff that is a different color on the inside and outside.

By resorting to using such a detail as rolled-up sleeves in one's image, a person sometimes underestimates their importance for the overall image. From the outside, this does not always look harmless and correct. By taking into account the recommendations given, you can avoid unwanted sloppiness in the image, swagger and even outrageousness.

Video